Abrasive spiral bands cylindrical

Aluminium oxide abrasive spiral band KSB cylindrical dia. 51x25 mm A150 for general use

Item number:
42240515
EAN:
4007220149546

Login / Register
Choose options
Abrasive
Dia internal
Grit size
Height
Packaging unit
Technical information
Aluminium oxide abrasive spiral band KSB cylindrical dia. 51x25 mm A150 for general use

Abrasive
Aluminium oxide A
Dia internal
51 mm
Grit size
150
Height
25 mm
RPM, optimum, from
7500 RPM
RPM, optimum, to
11200 RPM
Packaging unit
10 pieces
Description

For general applications from coarse to fine grinding.

In ISO 2421, abrasive spiral bands are designated as "cylindrical sleeves".

KSB = small pack of abrasive spiral bands

Advantages
  • The abrasive spiral band is firmly held in place on the rubber drum holder as the holder expands during use.
  • Excellent tool life due to special manufacturing process – even under the most demanding operating conditions.
  • Maximum economic efficiency thanks to particularly high stock removal rate and aggressive abrasive quality.
Recommendations for use
  • To easily change the abrasive spiral bands, give them a slight clockwise twist and pull them up and off. When doing so, leave the rubber drum holder clamped in the tool drive.
  • To ensure the abrasive spiral band is securely attached, adhere to the minimum speed for the rubber drum holder.
  • For the best results, use at a recommended cutting speed of 20-30 m/s.
  • Use grinding oil that is suitable for the material in order to significantly increase the tool life and the abrasive performance of the tools.
Ordering notes
  • Please order rubber drum holder separately.
Safety notes
  • The maximum permitted peripheral speed is 30 m/s.
  • For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.
  • Do not allow abrasive spiral bands to protrude beyond the rubber drum holder.
Materials that can be worked
Aluminium
Annealed cast iron
Brass
Bronze
Cast steel
Cobalt-based alloys
Copper
Fibre-reinforced thermosetting plastics (GRP, CRP)
Grey/nodular cast iron (GG/GJL, GGG/GJS)
Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC)
Stainless steel (INOX)
Steel materials with a hardness > 54 HRC
Steels up to 1,200 N/mm² (< 38 HRC)
Thermoplastics
Applications
Deburring
Leveling
Roughening
Sharpening
Step-by-step fine grinding
Surface work
Working on edges
Work on weld seams
Drive types
Flexible shaft drive
Straight grinder
Downloads

PFERD Newsletter subscription

Register here free of charge for our PFERD newsletter and receive all the latest news on products, services and promotions from the world of PFERD on a regular basis.