Miniature end brush PBU dia. 5 mm shank dia. 2.34 mm steel wire dia. 0.10

Technical information

Dia. cup: 5 mm
Dia. external: 5 mm
Dia. filament material: 0.1 mm
Dia. shank: 2.34 mm
Filament material: Steel wire (ST)
Length, filament: 8 mm
Length, total: 1 3/4
Length, total: 45 mm
Max. RPM: 25000 RPM
Mounting system: Shank
RPM, optimum, from: 5000 RPM
RPM, optimum, to: 15000 RPM
Packaging unit: 10 pieces

Description

Suitable for light brushing such as deburring, cleaning and polishing.

PFERD offers a wide range of miniature brushes for precision work. These can be used on flexible shaft drives, micro motors or electric grinders.

Steel wire is the most common filament material. Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring. PFERD special wire has high tensile strength and bending fatigue strength. This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications.

Steel wire withstands temperatures up to 300 Â°C.

Advantages

Maximum precision and efficiency in work on delicate workpieces.
Optimal access to hard-to-reach areas such as drilled holes and cavities as the filament spreads out upon rotation.
Long tool life through use of PFERD special wire.
Creates fine surfaces.

Recommendations for use

Please observe the recommended rotational speeds.

Safety notes

When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This applies in particular for use in the high rotational speed range. The minimum clamping length is 10 mm.

Materials that can be worked: Cast iron; Cast steel; Elastomers; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Thermoplastics; Thermosetting plastics; Wood

Applications: Cleaning; Deburring; Derusting; Paint stripping; Removing oxide layers; Roughening

Drive types: Drive spindle; Flexible shaft drive; Straight grinder

Downloads

End brushes crimped miniature brushes, shank-mounted

Miniature end brush PBU dia. 5 mm shank dia. 2.34 mm steel wire dia. 0.10

Matching tool drive

PFERD Newsletter subscription