Pneumatic angle grinder PWS 26/150

compressed-air turbo angle grinder PWT 26/150 HV NITOCUT for dia. 150mm 12,000 RPM/2,600 watts

Item number: 80201035
EAN: 4007220224038
Login / Register Retailers-Search
Technical information

compressed-air turbo angle grinder PWT 26/150 HV NITOCUT for dia. 150mm 12,000 RPM/2,600 watts


Air consumption, at idle
0.9 m³/min
Air consumption, under load
2.25 m³/min
Air supply hose internal dia.
16 mm
Dia. thread
M14
Dia. tool mounting
25.4 mm
Exhaust direction
bottom
Height
97 mm
Length
295 mm
Power output without oil
2600 watts
Rotational speed without oil
12000 RPM
Throttle type
Lever
Packaging unit
1 Piece
Description

The drive has a threaded tool mounting for tools with female threads or flange mounting.

The exhaust air flow of the air grinder is at the bottom.

NITOCUT angle grinder with tool diameter 150 mm. The drive has an integrated centrifugal governor. It must only be used without oil.

Advantages
  • The drive is powerful.
  • Thanks to its threaded mounting, the drive is ideal for the recommended tools with female thread or flange mounting.
  • Its integrated centrifugal governor enables a constant rotational speed to be maintained during use.
Recommendations for use
  • Suitable for NITOCUT cut-off wheel 150 mm.
Safety notes
  • Only suitable for 150 mm NITOCUT cut-off wheels.
  • Conventional cut-off wheels achieve a max. peripheral speed of 80 m/sec. They must not be used on the NITOCUT angle grinder.
  • In order to prevent misuse, the specially produced angle grinder only allows NITOCUT cut-off wheels to be mounted.
  • Using oil with the compressed air can damage the motor.
PFERDVALUE
product.aggregation.prv-eff

product.aggregation.prv-ergo
product.aggregation.prv-ergo

Downloads
chevron-leftAlertBrowse fileFileImagePdfWordTextExcelPowerpointArchiveCsvAudioVideoSpinnerSort NoneSort ASCSort DESC