POLICAP abrasive cap PC cylindrical shape with radius end ceramic oxide grain dia. 10x15 mm CO-COOL120 for stainless steel

Technical information

POLICAP abrasive cap PC cylindrical shape with radius end ceramic oxide grain dia. 10x15 mm CO-COOL120 for stainless steel

Abrasive: CO-COOL
Dia. external: 10 mm
Grit size: 120
Height: 15 mm
RPM, optimum: 20000 RPM
Packaging unit: 50 pieces

Description

POLICAP abrasive caps in cylindrical shape with radius end WRC (previously shape C).

POLICAP tools have a seamless design and the entire tool surface can be used.

Due to the special structure of the ceramic oxide grain and the active-grinding bond components, ideally suited to working on stainless steels (INOX), as well as the high-temperature-resistant nickel-based and cobalt-based alloys that are frequently used in turbine construction, such as Inconel, Hastelloy. The active-grinding additives prevent clogging and facilitate cooler grinding with a considerably higher stock removal rate.

Colour code for ceramic oxide grain CO-COOL = red

Advantages

The abrasive caps and abrasive spiral bands are firmly held in place on the holder as the holder expands during use.
Good dimensional stability and excellent fine grinding thanks to special manufacturing process.
Easy tool change.

Recommendations for use

To easily change the abrasive caps and abrasive spiral bands, give them a slight clockwise twist and pull them up and off. When doing so, leave the arbor clamped in the tool drive and attach.
For the best results, use at a recommended cutting speed of 10-20 m/s.

Safety notes

The maximum permitted peripheral speed is 25 m/s.
For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.

Materials that can be worked: Annealed cast iron; Bronze; Cobalt-based alloys; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel materials with a hardness > 54 HRC

Applications: Leveling; Step-by-step fine grinding; Surface work

Drive types: Flexible shaft drive; Straight grinder

Downloads

POLICAP cones cylindrical shape with radius end (WRC)

POLICAP abrasive cap PC cylindrical shape with radius end ceramic oxide grain dia. 10x15 mm CO-COOL120 for stainless steel

PFERD Newsletter subscription