POLICAP cones cylindrical shape with radius end (WRC)

POLICAP abrasive cap PC cylindrical shape with radius end ceramic oxide grain dia. 5x11 mm CO-COOL120 for stainless steel

Item number: 42302057
EAN: 4007220953945
Login / Register Retailers-Search
Choose options
Abrasive
Dia. external
Grit size
Packaging unit
Technical information

POLICAP abrasive cap PC cylindrical shape with radius end ceramic oxide grain dia. 5x11 mm CO-COOL120 for stainless steel


Abrasive
CO-COOL
Dia. external
5 mm
Dia. external [inch]
3 /16 Inch
Grit size
120
Height
11 mm
RPM, optimum
40000 RPM
Packaging unit
50 pieces
Description

POLICAP abrasive caps in cylindrical shape with radius end WRC (previously shape C).

POLICAP tools have a seamless design and the entire tool surface can be used.

Due to the special structure of the ceramic oxide grain and the active-grinding bond components, ideally suited to working on stainless steels (INOX), as well as the high-temperature-resistant nickel-based and cobalt-based alloys that are frequently used in turbine construction, such as Inconel, Hastelloy. The active-grinding additives prevent clogging and facilitate cooler grinding with a considerably higher stock removal rate.

Colour code for ceramic oxide grain CO-COOL = red

Advantages
  • The abrasive caps and abrasive spiral bands are firmly held in place on the holder as the holder expands during use.
  • Good dimensional stability and excellent fine grinding thanks to special manufacturing process.
  • Easy tool change.
Recommendations for use
  • To easily change the abrasive caps and abrasive spiral bands, give them a slight clockwise twist and pull them up and off. When doing so, leave the arbor clamped in the tool drive and attach.
  • For the best results, use at a recommended cutting speed of 10-20 m/s.
Safety notes
  • The maximum permitted peripheral speed is 25 m/s.
  • For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.
Materials that can be worked
Annealed cast iron
Bronze
Cobalt-based alloys
Grey/nodular cast iron (GG/GJL, GGG/GJS)
Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC)
Nickel-based alloys (e.g. Inconell and Hastelloy)
Stainless steel (INOX)
Steel materials with a hardness > 54 HRC
Applications
Levelling
Step-by-step fine grinding
Surface work
Drive types
Flexible shaft drive
Straight grinder
Downloads
chevron-leftAlertBrowse fileFileImagePdfWordTextExcelPowerpointArchiveCsvAudioVideoSpinnerSort NoneSort ASCSort DESC