Tungsten carbide burrs for high performance, STEEL, ball shape KUD

Tungsten carbide high-performance burr STEEL ball KUD dia. 12x10 mm shank dia. 6 mm for steel

Item number: 21112887
EAN: 4007220936870
Login / Register Retailers-Search
Choose options
Dia. external
Dia. shank
Length, cut
Length, total
Technical information

Tungsten carbide high-performance burr STEEL ball KUD dia. 12x10 mm shank dia. 6 mm for steel


Cut
STEEL
Dia. external
12 mm
Dia. shank
6 mm
Length, cut
10 mm
Length, total
51 mm
RPM from, hardened, heat-treated steels over 1,200 N/mm²
12000 RPM
RPM from, steels up to 1,200 N/mm²
12000 RPM
RPM to, hardened, heat-treated steels over 1,200 N/mm²
20000 RPM
RPM to, steels up to 1,200 N/mm²
20000 RPM
Packaging unit
1 Piece
Description

With the innovative STEEL cut, PFERD has developed unique burrs for working with steel and cast steel. They feature tangibly increased aggressiveness and good guidance. They thus ensure safe and precise work. Thanks to their extremely high stock removal rate, burrs with the STEEL cut help users save considerable time when working, thus making them an economically efficient option.

Ball-shaped burr according to DIN 8032.

Advantages
  • Up to 50 % higher stock removal rate when used on steel and cast steel in comparison to conventional cross-cut burrs.
  • Tangibly more aggressive, large chips and very good chip removal through the innovative tooth geometry.
  • Workpieces are protected through significantly lower thermal load.
  • The highly accurate concentricity enables impact­free working without creating chatter marks. This considerably reduces wear on the tool and tool drive.
Recommendations for use
  • To prevent vibrations, place the tools on powerful drives with an elastically supported spindle wherever possible.
  • Observe the recommended rotational speeds.
  • To ensure cost­effective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6 mm with drives with a power output from 300 watts.
Safety notes
  • The very high stock removal rate can cause discolouration on the shank. This does not constitute a safety risk.
Materials that can be worked
Case-hardened steels
Cast steel
Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC)
Steel
Steel, cast steel
Steels over 700 N/mm² (> 220 HB)
Steels up to 1,200 N/mm² (< 38 HRC)
Steels up to 700 N/mm² (< 220 HB)
Tool steels
Applications
Cutting out holes
Deburring
Leveling
Milling
Milling out
Surface work
Work on weld seams
Drive types
Flexible shaft drive
Robot
Stationary machines
Straight grinder
Tool machine
PFERDVALUE
product.aggregation.prv-eff
product.aggregation.prv-eff
product.aggregation.prv-eff
product.aggregation.prv-eff

product.aggregation.prv-ergo
product.aggregation.prv-ergo
product.aggregation.prv-ergo

Downloads
chevron-leftAlertBrowse fileFileImagePdfWordTextExcelPowerpointArchiveCsvAudioVideoSpinnerSort NoneSort ASCSort DESC