Wheel brush slim crimped RBU dia. 100x12x14 mm hole steel wire dia. 0.30

Technical information

Dia. external: 100 mm
Dia. filament material: 0.3 mm
Dia. hole: 14 mm
Filament material: Steel wire (ST)
Grit size: No information
Length, filament: 24 mm
Max. RPM: 8000 RPM
Mounting system: Centre hole
RPM, optimum, from: 4000 RPM
RPM, optimum, to: 6000 RPM
Width: 12 mm
Packaging unit: 2 pieces

Description

Steel wire is the most common filament material. Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring. PFERD special wire has high tensile strength and bending fatigue strength. This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications.

Steel wire withstands temperatures up to 300 Â°C.

Excellent for medium-duty hand-held or automated brushing of workpieces with large surfaces.

Advantages

The special design enables bunching to create wide gapless rollers. This enables a uniform surface finish to be achieved.
Highly flexible, enabling optimal adjustment to the workpiece contour.
Long tool life through use of PFERD special wire.
Creates fine surfaces.
Can be used with all commercially available stationary drive systems and bench grinders thanks to the variable hole diameter.

Recommendations for use

Please observe the recommended rotational speeds.

Materials that can be worked: Cast iron; Cast steel; Elastomers; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Thermoplastics; Thermosetting plastics; Wood

Applications: Cleaning; Deburring; Derusting; Paint stripping; Removing oxide layers; Roughening

Drive types: Bench grinder; Drive spindle; Flexible shaft drive; Straight grinder

Downloads

Wheel brushes crimped slim, with hole

Wheel brush slim crimped RBU dia. 100x12x14 mm hole steel wire dia. 0.30

Matching accessories & spare parts

Matching tool drive

PFERD Newsletter subscription