Wheel brush slim crimped RBU dia. 125x12x14 mm hole stainless steel wire dia. 0.30

Technical information

Dia. external: 125 mm
Dia. filament material: 0.3 mm
Dia. hole: 14 mm
Filament material: Stainless steel wire (INOX)
Grit size: No information
Length, filament: 32 mm
Max. RPM: 8000 RPM
Mounting system: Centre hole
RPM, optimum, from: 3200 RPM
RPM, optimum, to: 5200 RPM
Width: 12 mm
Packaging unit: 2 pieces

Description

In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1.4310 (V2A) for all INOX brushes. Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life. All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A. The wire quality 1.4310 tends to become ferromagnetic in the case of cold working; i.e. it can be attracted using magnets. The reason for this is a change in the microstructure caused by deformation (e.g. during the wire drawing process). This does not have any impact on the quality and corrosion resistance of the INOX filament. The filament is still resistant to corrosion.

Stainless steel wire (INOX) withstands temperatures up to 450 °C.

Excellent for medium-duty hand-held or automated brushing of workpieces with large surfaces.

Advantages

The special design enables bunching to create wide gapless rollers. This enables a uniform surface finish to be achieved.
Highly flexible, enabling optimal adjustment to the workpiece contour.
Very good corrosion resistance.
Creates fine surfaces.
Can be used with all commercially available stationary drive systems and bench grinders thanks to the variable hole diameter.
The brush is degreased and does not leave any oil residue on the workpiece.

Recommendations for use

Please observe the recommended rotational speeds.

Materials that can be worked: Aluminium; Bronze; Cobalt-based alloys; Hard non-ferrous metal; High-temperature-resistant materials; Nickel-based alloys (e.g. Inconell and Hastelloy); Nickel or titanium-based superalloys; Other non-ferrous metals; Soft titanium alloys (tensile strength 500 N/mm²); Stainless steel (INOX); Titanium; Titanium alloys

Applications: Cleaning; Deburring; Derusting; Paint stripping; Removing heat discolouration; Removing oxide layers; Roughening

Drive types: Bench grinder; Drive spindle; Flexible shaft drive; Straight grinder

Downloads

Wheel brushes crimped slim, with hole

Wheel brush slim crimped RBU dia. 125x12x14 mm hole stainless steel wire dia. 0.30

Matching accessories & spare parts

Matching tool drive

PFERD Newsletter subscription