Wheel brush crimped RBU dia. 250x15x50.8 mm hole SiC filament dia. 0.55 mm grit 120 stationary

Technical information

Wheel brush crimped RBU dia. 250x15x50.8 mm hole SiC filament dia. 0.55 mm grit 120 stationary

Dia. external: 250 mm
Dia. filament material: 0.55 mm
Dia. hole: 50.8 mm
Filament material: Silicon carbide (SiC)
Grit size: 120
Length, filament: 55 mm
Max. RPM: 3600 RPM
Mounting system: Centre hole
RPM, optimum, from: 1400 RPM
RPM, optimum, to: 2300 RPM
Width: 15 mm
Packaging unit: 1 piece

Description

Brushes with silicon carbide (SiC) are particularly well suited to deburring work and surface improvement.

Plastic filament withstands temperatures up to 220 °C.

Ideal for processing aluminium due to the longer trim length and higher degree of flexibility. Suitable for use on stationary machines, automated centres and robots.

Advantages

The special design enables bunching to create wide gapless rollers. This enables a uniform surface finish to be achieved.
Highly flexible, enabling optimal adjustment to the workpiece contour.
Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip.

Recommendations for use

Please observe the recommended rotational speeds.
Use coolant for applications where large amounts of heat are produced.

Materials that can be worked: Aluminium; Bronze; Cast iron; Cast steel; Cobalt-based alloys; Other non-ferrous metals; Stainless steel (INOX); Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Thermoplastics; Thermosetting plastics; Wood

Applications: Cleaning; Deburring; Roughening; Structuring (matt finishing, brush matting and satin finishing)

Drive types: Bench grinder; Drive spindle; Stationary machines

Downloads

Wheel brushes crimped slim, with hole

Wheel brush crimped RBU dia. 250x15x50.8 mm hole SiC filament dia. 0.55 mm grit 120 stationary

Matching accessories & spare parts

PFERD Newsletter subscription