ceramic oxide grain abrasive spiral band GSB conical dia. 22-36x60mm CO-COOL36 for maximum stock removal on stainless steel

Technical information

ceramic oxide grain abrasive spiral band GSB conical dia. 22-36x60mm CO-COOL36 for maximum stock removal on stainless steel

Abrasive: CO-COOL
Dia internal: 36 mm
Dia internal, small: 22 mm
Dia. external [inch]: 1.1 /2 Inch
Grit size: 36
Height: 60 mm
RPM, optimum, from: 10000 RPM
RPM, optimum, to: 15900 RPM
Packaging unit: 100 pieces

Description

For aggressive grinding with maximum stock removal rate on hard and tough materials which do not conduct heat well. Consistently high performance due to self-sharpening ceramic oxide grain. Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.

In ISO 2421, abrasive spiral bands are designated as "cylindrical sleeves".

GSB = bulk pack of abrasive spiral bands

Advantages

The abrasive spiral band is firmly held in place on the rubber drum holder as the holder expands during use.
Excellent tool life due to special manufacturing process – even under the most demanding operating conditions.
Maximum economic efficiency thanks to particularly high stock removal rate and aggressive abrasive quality.
The packaging size is ideally suited to industrial requirements.

Recommendations for use

To easily change the abrasive spiral bands, give them a slight clockwise twist and pull them up and off. When doing so, leave the rubber drum holder clamped in the tool drive.
To ensure the abrasive spiral band is securely attached, adhere to the minimum speed for the rubber drum holder.
Use grinding oil that is suitable for the material in order to significantly increase the tool life and the abrasive performance of the tools.

Ordering notes

Please order rubber drum holder separately.

Safety notes

The maximum permitted peripheral speed is 30 m/s.
For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.
Do not allow abrasive spiral bands to protrude beyond the rubber drum holder.

Materials that can be worked: Aluminium; Annealed cast iron; Bronze; Cobalt-based alloys; Grey/nodular cast iron (GG/GJL, GGG/GJS); Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Titanium

Applications: Deburring; Levelling; Roughening; Sharpening; Step-by-step fine grinding; Surface work; Working on edges; Work on weld seams

Drive types: Flexible shaft drive; Straight grinder

Downloads

Europe

America

Asia & Pacific

Africa

Global

Abrasive spiral bands, conical

ceramic oxide grain abrasive spiral band GSB conical dia. 22-36x60mm CO-COOL36 for maximum stock removal on stainless steel

ceramic oxide grain abrasive spiral band GSB conical dia. 22-36x60mm CO-COOL36 for maximum stock removal on stainless steel