Composite disc brushes crimped Composite, with bridle, shank-mounted

COMPOSITE composite disc brush DBUR dia. 63 mm shank dia. 6 mm ceramic filament dia. 1.10 mm grit 120 stationary

Item number: 43400046
EAN: 4007220104705
Login / Register Retailers-Search
Choose options
Dia. external
Dia. filament material
Filament material
Technical information

COMPOSITE composite disc brush DBUR dia. 63 mm shank dia. 6 mm ceramic filament dia. 1.10 mm grit 120 stationary


Dia. external
63 mm
Dia. external [inch]
2.1 /2 Inch
Dia. filament material
1.1 mm
Dia. shank
6 mm
Dia. shank [inch]
6 mm
Filament material
Ceramic oxide grain (CO)
Grit size
120
Length, filament
38 mm
Length, filament to ring
19 mm
Length, total
80 mm
Length, total [inch]
3.1 /8 Inch
Mounting system
Shank
RPM, max.
5000 RPM
RPM, optimum, from
1500 RPM
RPM, optimum, to
3500 RPM
Packaging unit
1 piece
Description

Particularly aggressive brush with bridle. Particularly suitable for deburring and work on surfaces on stationary machines.

Composite brushes from PFERD have been specifically developed for industrial, automated use. They are suitable for a variety of applications and their variable clamping options mean that they can be used on many different drive systems. This offers the advantage that the workpiece can be produced and finished on the same machine. As a result, labour-intensive, manual work is reduced and reproducible results are achieved with short cycle times. For efficient use, numerous application parameters such as the processing time and feed rate must be coordinated with each other and a suitable brush must be selected.

Brushes with ceramic oxide grain (CO) offer good toughness and excellent sharpness. For high stock removal values and aggressive brushing behaviour.

Plastic filament withstands temperatures up to 220 °C.

Advantages
  • Long tool life and aggressive brushing effect due to a very high filament density.
  • Extremely smooth operation due to even distribution of the filament material.
  • If the filament has worn away down to the bridle, it can be removed from the bridle for further use. This does not affect the brushing behaviour.
  • The bridle enables the spreading out and flexibility of the brush filament to be controlled.
  • The bridle prevents the wires spreading out sideways.
  • Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip.
  • For particularly aggressive machining and for giving the workpiece a high surface quality.
Recommendations for use
  • Please observe the recommended rotational speeds.
  • Remove the bridle once the filament is worn down. Then the rest of the filament can be used.
  • Remove the bridle before starting work if you would like to achieve a large spreading diameter or access hard-to-reach areas.
  • The CO filament material is suitable for particularly aggressive machining and for giving the workpiece a high surface quality.
  • Use coolant for applications where large amounts of heat are produced.
Safety notes
  • When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This applies in particular for use in the high rotational speed range. The minimum clamping length is 10 mm.
Materials that can be worked
Aluminium
Bronze
Cast iron
Cobalt-based alloys
Hard non-ferrous metal
High-temperature-resistant materials
Nickel-based alloys (e.g. Inconell and Hastelloy)
Nickel or titanium-based superalloys
Other non-ferrous metals
Soft titanium alloys (tensile strength 500 N/mm²)
Steel, cast steel
Titanium
Titanium alloys
Applications
Cleaning
Deburring
Structuring (matt finishing, brush matting and satin finishing)
Drive types
Flexible shaft drive
Robot
Stationary machines
Straight grinder
Tool machine
PFERDVALUE
product.aggregation.prv-eff

product.aggregation.prv-ergo

Downloads
chevron-leftAlertBrowse fileFileImagePdfWordTextExcelPowerpointArchiveCsvAudioVideoSpinnerSort NoneSort ASCSort DESC