SINGLETWIST end brush knotted PBGS dia. 10 mm shank dia. 6 mm steel wire dia. 0.20

Technical information

SINGLETWIST end brush knotted PBGS dia. 10 mm shank dia. 6 mm steel wire dia. 0.20

Dia. cup: 10 mm
Dia. external: 10 mm
Dia. filament material: 0.2 mm
Dia. shank: 6 mm
Filament material: Steel wire (ST)
Length, filament: 25 mm
Length, total: 2-9/16
Length, total: 65 mm
Max. RPM: 10000 RPM
Mounting system: Shank
Number, knots: 1 pcs.
Packaging: Industrial packaging
RPM, optimum, from: 5000 RPM
RPM, optimum, to: 7500 RPM
Packaging unit: 10 pieces

Description

Particularly flexible single-knot brush for special applications.

Steel wire is the most common filament material. Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring. PFERD special wire has high tensile strength and bending fatigue strength. This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications.

Steel wire withstands temperatures up to 300 Â°C.

Advantages

Optimal access to hard-to-reach areas such as inside corners, as the knot is less likely to unravel.
Long tool life through use of PFERD special wire.

Recommendations for use

Please observe the recommended rotational speeds.
For optimum results, use on speed-adjustable tool drives.
For the best results, use a tool drive with a minimum output of 300 watts.

Safety notes

When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This applies in particular for use in the high rotational speed range. The minimum clamping length is 10 mm.

Materials that can be worked: Cast iron; Cast steel; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC)

Applications: Cleaning; Deburring; Derusting; Descaling; Paint stripping; Removing oxide layers; Root seam processing; Work on fillet welds; Work on weld seams

Drive types: Drive spindle; Flexible shaft drive; Power drill; Straight grinder

Downloads

End brushes knotted, SINGLETWIST, shank-mounted

SINGLETWIST end brush knotted PBGS dia. 10 mm shank dia. 6 mm steel wire dia. 0.20

Matching tool drive

PFERD Newsletter subscription