Legal notice Data protection Career

Extensions for drive spindles SPVH9 L800-3 S6

Extension for drive spindles SPVH9 length 800 mm 3 S6 Max.RPM 25,000 incl. 3 mm collet

Item number:
87101502
EAN:
4007220938218
Extension for drive spindles SPVH9 length 800 mm 3 S6 Max.RPM 25,000 incl. 3 mm collet 1
Extension for drive spindles SPVH9 length 800 mm 3 S6 Max.RPM 25,000 incl. 3 mm collet 1
Technical data
Login / Register
Retailers-Search
Technical information
Extension for drive spindles SPVH9 length 800 mm 3 S6 Max.RPM 25,000 incl. 3 mm collet
Collet group
2
Dia. shank holder [mm]
6
Dia. spindle, max.
9 mm
Dia. tool mounting
3 mm
Incl. dia collet [mm]
3
Length, mounting pin
28 mm
Length, total
906 mm
Max. RPM
25000 RPM
Net weight
0.52 kg
Packaging unit
1 piece
Description

With drive spindle extensions, shanks of grinding and milling tools can be extended. They allow access to difficult-to-reach areas and particularly deep cores. They are clamped into the collet of the machine (air or electric grinder) or into the flexible shaft handpiece. They must also be guided by hand.

With drive spindle extensions, shanks of grinding and milling tools can be extended. They allow access to difficult-to-reach areas and particularly deep cores. They are clamped into the collet of the machine (air or electric grinder) or into the flexible shaft handpiece. They must also be guided by hand.

Extension for drive spindles for manual application with a diameter of 9 mm, a length of 800 mm, a tool mounting of 3 mm and a shank holder of 6 mm.
Advantages
  • Cost-effective alternative to customized burrs and mounted points with long shanks.
Ordering notes
  • Special lengths are available on request.
Safety notes
  • The maximum permitted rotational speed is 25,000 RPM.
  • Caution! When using spindle extensions, please observe the valid safety regulations and accident prevention regulations. Please do not clamp tools which are too large on the extension since they are driven by a core. The extension and machine must be guided in a line. Levering and tilting result in damage to the extension.
  • When working with long shank lengths, it is essential that the tool is inserted into the workpiece (e.g. bores, pipes, ducts or keyways) before the drive system is switched on. The extension is only intended for manual use in connection with suitable air grinders, electric grinders or flexible shaft handpieces for tools with standard shanks. The extension and a tool permitted for use at the appropriate rotational speed are clamped into an impact-free collet on the device. Do not clamp on the transition radius. Clamping of a second extension or of tools with excessively long shanks is not permitted.
Contents
  • 2 keys DM SW 6/7 mm and 1 collet 3 mm.
Downloads
See more
Scroll to top

PFERD Newsletter subscription

Register here free of charge for our PFERD newsletter and receive all the latest news on products, services and promotions from the world of PFERD on a regular basis.