HSS rotary cutters, cut 1, conical pointed shape G

HSS rotary cutter conical pointed shape G dia. 10x20 mm shank dia. 6 mm Z 1 universal coarse

Item number:: 22423316
EAN:: 4007220059234

Technical data Change variant

Retailers-Search

Choose options

Dia. external

10 mm 12 mm

Length, cut

20 mm 25 mm

Reset Filter

Technical information

HSS rotary cutter conical pointed shape G dia. 10x20 mm shank dia. 6 mm Z 1 universal coarse

Angle: 28 °
Cut: 1
Dia. external: 10 mm
Dia. shank: 6 mm
Length, cut: 20 mm
Length, total: 2,362
Length, total: 60 mm
RPM from, rust and acid-resistant steels: 2000 RPM
RPM from, soft non-ferrous metals: 6400 RPM
RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP) with a fibre content under 40 %: 6400 RPM
RPM to, rust and acid-resistant steels: 2600 RPM
RPM to, soft non-ferrous metals: 9600 RPM
RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP) with a fibre content under 40 %: 9600 RPM
Packaging unit: 1 piece

Description

Cut 1 is especially well suited for machining of stainless steel (INOX), soft non-ferrous metals and plastics. It is used in a rotational speed range of 1,200 to 23,900 RPM, depending on the burr diameter.

Conical pointed burr, flattened tip.

Advantages

Highly aggressive.
Can be used at low rotational speeds.
Very robust tooth cutting edges due to the toughness of the high-speed steel (HSS).
The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

Use HSS rotary cutters if your drive unit does not allow for high rotational speeds.
When used on soft materials, HSS rotary cutters can be an economical alternative to tungsten carbide burrs.
In contrast to tungsten carbide burrs, HSS rotary cutters need to be used with lower rotational speeds.
If the smallest area of the burr diameter is being used, the recommended rotational speed can be increased accordingly.

Materials that can be worked: Aluminium; Annealed cast iron; Black annealed cast iron (GTS, GJMB); Brass; Cast iron; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Grey/nodular cast iron (GG/GJL, GGG/GJS); Hardwood; Plastics; Soft aluminium alloys; Stainless steel (INOX); Thermoplastics; White annealed cast iron (GTW, GJMW); Wood; Zinc

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Work on weld seams

Drive types: Drive spindle; Flexible shaft drive; Robot; Stationary machines; Straight grinder; Tool machine

Downloads

Matching tool drive

Robot spindles for stationary application PGAS 4/24 RS PGAS 4/24 RS

HSS rotary cutters, cut 1, conical pointed shape G

HSS rotary cutter conical pointed shape G dia. 10x20 mm shank dia. 6 mm Z 1 universal coarse

Matching tool drive

PFERD Newsletter subscription