Non-woven abrasive belt VB 30x533 mm A180 M for fine grinding and finishing with a pipe belt grinder

Technical information

Abrasive: Aluminium oxide A
Acc. to ISO: ISO 2976
Grit size: 180 M
Length: 533 mm
Version: medium, red-brown
Width: 30 mm
Packaging unit: 5 pieces

Description

Suitable for general work on surfaces such as metal tubular structures, e.g. removing rough grinding traces, removing oxidation and light deburring work. Achieve matt and satin-finished surfaces.

Short belts are compatible with commonly available belt grinders. In ISO 2976, they are listed under the designation "abrasive belts".

POLIVLIES grit size 180 M = medium (red-brown)

Advantages

High economic efficiency due to high abrasive performance and long tool life.
High tear strength with optimum flexibility.
Consistent results through very good grain adhesion.

Recommendations for use

Use grinding oil that is suitable for the material in order to significantly increase the tool life and the abrasive performance of the tools.
For the best results, use at a recommended cutting speed of 5-15 m/s.

Safety notes

Follow the safety notes from the VDS (German Abrasives Association) â€œSafety notes for correct use of abrasive beltsâ€.

Materials that can be worked: Aluminium; Annealed cast iron; Brass; Bronze; Cast steel; Cobalt-based alloys; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Grey/nodular cast iron (GG/GJL, GGG/GJS); Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Thermoplastics; Titanium; Titanium alloys; Zinc

Applications: Deburring; Leveling; Sharpening; Step-by-step fine grinding; Working on edges; Work on weld seams

Drive types: Belt grinders and belt arms

Downloads

Short belts non-woven type

Non-woven abrasive belt VB 30x533 mm A180 M for fine grinding and finishing with a pipe belt grinder

PFERD Newsletter subscription