Tungsten carbide hole cutter/hole saw dia. 55x35 mm shank dia. 10 mm cutting depth 32 mm universal

Technical information

Tungsten carbide hole cutter/hole saw dia. 55x35 mm shank dia. 10 mm cutting depth 32 mm universal

Dia. external: 55 mm
Dia. shank: 10 mm
RPM, rust and acid-resistant steels: 115 - 290 RPM
RPM, soft non-ferrous metals: 250 - 380 RPM
RPM, steels up to 1,200 N/mm²: 230 - 350 RPM
RPM, thermoplastics, reinforced (GRP/CRP) with a fibre content of less than 40%: 250 - 380 RPM
Packaging unit: 1 piece

Description

Tungsten carbide hole cutters are professional tools for quick, precise hole-cutting (cut-outs) with a diameter of 16 to 105 mm. They are suitable for working on alloyed and non-alloyed steels, stainless steel (INOX), non-ferrous metals and plastics (including GRP). Tungsten carbide hole cutters are used on hand drills or on stationary machines. PFERD TOOLS hole cutters have an irregular tooth pitch (distance between teeth) to prevent tool chatter.

The deep version (tool height 35 mm) is suitable for use on curved surfaces and pipe materials. The maximum cutting depth is 32 mm.

Advantages

High concentricity, as the cutting head and shank are produced in one piece.
Optimum cutting performance due to sharp teeth made of high-quality tungsten carbide.
Interchangeable HSS pilot drill.

Recommendations for use

The recommended rotational speeds specified apply to machines capable of providing roughly constant rotational speed under load. For low-power machines where speeds drop sharply under load, the rotational speed can be increased by about 30 %. If the teeth of the cutter are not continuously engaged (e.g. on pipes or curved surfaces), the recommended rotational speed levels may be increased by up to 100 %. This will help to prevent chatter and tooth breakage when using the cutter in manual applications.
Tungsten carbide hole cutters are suitable for work on stainless steel (INOX).
In order to avoid corrosion, remove any particles which develop during work from the workpiece. Clean the workpiece chemically or mechanically (etching/polishing, etc.).
PFERD TOOLS tungsten carbide hole cutters can be resharpened. Timely and professional resharpening substantially lengthens the tool life. Please contact your local sharpening service.
The 55.0 mm diameter is suitable for cutting out holes for built-in lights with a 55 mm diameter.

Ordering notes

Tungsten carbide hole cutters are supplied together with the pilot drill.

Materials that can be worked: Aluminium; Annealed cast iron; Black annealed cast iron (GTS, GJMB); Brass; Bronze; Case-hardened steels; Cast iron; Cast steel; Chipboard; Copper; Elastomers; Fibre-reinforced thermosetting plastics (GRP, CRP); Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 %; Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content ≤ 40 %; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hard aluminium alloys; Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Hard non-ferrous metal; Hardwood; Other; Other non-ferrous metals; Plastics; Soft aluminium alloys; Soft non-ferrous metal; Soft titanium alloys (tensile strength 500 N/mm²); Soft wood; Stainless steel (INOX); Steel; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels over 700 N/mm² (> 220 HB); Steels up to 1,200 N/mm² (< 38 HRC); Steels up to 700 N/mm² (< 220 HB); Thermoplastics; Thermosetting plastics; Titanium; Titanium alloys; Tool steels; Tough aluminium alloys; White annealed cast iron (GTW, GJMW); Wood; Zinc

Applications: Cutting out holes; Drilling

Drive types: Column drill; Power drill; Robot; Stationary machines

Downloads

251563-beileger-hm-lochschneider-35-mm-2019-72dpi.pdf

TC hole cutter deep version 35 mm, shank dia. 10 mm

Tungsten carbide hole cutter/hole saw dia. 55x35 mm shank dia. 10 mm cutting depth 32 mm universal

LOS HM 5535

Matching accessories & spare parts

PFERD TOOLS Newsletter subscription