Tungsten carbide burr set for high performance, cut ALLROUND

Tungsten carbide high-performance burr set ALLROUND 5-piece burr dia. 12 mm shank dia. 6 mm universal coarse

Item number: 21901412
EAN: 4007220133576
Login / Register Retailers-Search
Choose options
PFERD type
Technical information

Tungsten carbide high-performance burr set ALLROUND 5-piece burr dia. 12 mm shank dia. 6 mm universal coarse


Cut
ALLROUND
Dia. shank
6 mm
Dia. shank [inch]
6 mm
PFERD type
1412 ALLROUND
Packaging unit
1 piece
Description

The 1412 ALLROUND set contains five versatile tungsten carbide burrs for use on important materials such as steel and cast steel, stainless steel (INOX), non-ferrous metals and cast iron in the most common shapes and dimensions. The sturdy plastic box protects the tools from dirt and damage. The burrs are secured at the shanks, facilitating the selection and withdrawal of the tools. Five further slots are available for other burrs.

Advantages
  • Significantly better stock removal rate than burrs with a conventional cross cut.
  • Saves time and money thanks to its very high stock removal rate on key materials.
  • Comfortable working thanks to reduced vibration and less noise.
  • The highly accurate concentricity enables impact­free working without creating chatter marks and the drive is subject to less wear.
Recommendations for use
  • To prevent vibrations, place the tools on powerful drives with an elastically supported spindle wherever possible.
  • Observe the recommended rotational speeds.
Safety notes
  • The very high stock removal rate can cause discolouration on the shank. This does not constitute a safety risk.
Materials that can be worked
Annealed cast iron
Black annealed cast iron (GTS, GJMB)
Brass
Bronze
Case-hardened steels
Cast iron
Cast steel
Copper
Grey/nodular cast iron (GG/GJL, GGG/GJS)
Hard aluminium alloys
Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC)
Hard non-ferrous metal
Stainless steel (INOX)
Steel
Steel, cast steel
Steels over 700 N/mm² (> 220 HB)
Steels up to 1,200 N/mm² (< 38 HRC)
Steels up to 700 N/mm² (< 220 HB)
Titanium
Titanium alloys
Tool steels
White annealed cast iron (GTW, GJMW)
Zinc
Applications
Cutting out holes
Deburring
Levelling
Milling
Milling out
Surface work
Work on weld seams
Drive types
Flexible shaft drive
Robot
Stationary machines
Straight grinder
Tool machine
PFERDVALUE
product.aggregation.prv-eff
product.aggregation.prv-eff
product.aggregation.prv-eff
product.aggregation.prv-eff

product.aggregation.prv-ergo
product.aggregation.prv-ergo
product.aggregation.prv-ergo

chevron-leftAlertBrowse fileFileImagePdfWordTextExcelPowerpointArchiveCsvAudioVideoSpinnerSort NoneSort ASCSort DESC