Tungsten carbide burr ball KUD dia. 20x18 mm shank dia. 6 mm Z3 universal medium cut

Technical information

Cut: 3
Dia. external: 20 mm
Dia. shank: 6 mm
Length, cut: 18 mm
Length, total: 2,283
Length, total: 58 mm
RPM from, grey cast iron, white cast iron: 7000 RPM
RPM from, hard non-ferrous metals: 4000 RPM
RPM from, hardened, heat-treated steels over 1,200 N/mm²: 4000 RPM
RPM from, rust and acid-resistant steels: 4000 RPM
RPM from, soft non-ferrous metals: 7000 RPM
RPM to, grey cast iron, white cast iron: 10000 RPM
RPM to, hard non-ferrous metals: 6000 RPM
RPM to, hardened, heat-treated steels over 1,200 N/mm²: 6000 RPM
RPM to, rust and acid-resistant steels: 6000 RPM
RPM to, soft non-ferrous metals: 10000 RPM
Packaging unit: 1 piece

Description

Cut 3 is especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its high stock removal rate and achieves a good surface.

Tungsten carbide burrs for general applications are suitable for fine and coarse stock removal on the key materials used in industrial manufacturing. They provide a good stock removal rate and are not specific to a particular material.

Ball-shaped burr according to DIN 8032 with cut conforming to DIN 8033.

Advantages

Good stock removal rate through optimum matching of tungsten carbide, geometry, cut and available coating.
Long tool life.
The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.
High surface quality.

Recommendations for use

To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6 mm with drives with a power output from 300 watts.

Materials that can be worked: Annealed cast iron; Black annealed cast iron (GTS, GJMB); Brass; Bronze; Case-hardened steels; Cast iron; Cast steel; Copper; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hard aluminium alloys; Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Hard non-ferrous metal; Soft non-ferrous metal; Stainless steel (INOX); Steel; Steel, cast steel; Steels over 700 N/mm² (> 220 HB); Steels up to 1,200 N/mm² (< 38 HRC); Steels up to 700 N/mm² (< 220 HB); Titanium; Titanium alloys; Tool steels; White annealed cast iron (GTW, GJMW); Zinc

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work; Work on weld seams

Drive types: Flexible shaft drive; Robot; Stationary machines; Straight grinder; Tool machine

Downloads

Tungsten carbide burrs for general use, cut 3, ball shape KUD

Tungsten carbide burr ball KUD dia. 20x18 mm shank dia. 6 mm Z3 universal medium cut

PFERD Newsletter subscription