Tungsten carbide burrs for high performance, ALU, conical shape with radius end KEL

Tungsten carbide high-performance burr ALU tree shape with radius end KEL dia. 10x20mm shank dia. 6mm for aluminium/non-ferrous metals

Item number:
21125088
EAN:
4007220953020

Login / Register
Choose options
Dia. external
Dia. shank
Length, cut
Length, total
Technical information
Tungsten carbide high-performance burr ALU tree shape with radius end KEL dia. 10x20mm shank dia. 6mm for aluminium/non-ferrous metals

Angle
14 °
Cut
ALU
Dia. external
10 mm
Dia. shank
6 mm
Length, cut
20 mm
Length, total
2,362
Length, total
60 mm
RPM from, hard non-ferrous metals
19000 RPM
RPM from, soft non-ferrous metals
19000 RPM
RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP)
19000 RPM
RPM to, hard non-ferrous metals
35000 RPM
RPM to, soft non-ferrous metals
35000 RPM
RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP)
35000 RPM
Radius corner design
2.9 mm
Packaging unit
1 piece
Description

PFERD has further developed the ALU cut especially for stock removal on aluminium. This cut is characterized by its high stock removal rate.

Conical burr with round radius end according to DIN 8032.

Advantages
  • Extremely high stock removal rate.
  • Large chips.
  • Reduced material adhesion.
  • Long tool life and smooth running.
  • Can be used with cutting speeds of up to 1,100 m/min.
  • The highly accurate concentricity enables impact­free working without creating chatter marks. This considerably reduces wear on the tool and tool drive.
Recommendations for use
  • To prevent vibrations, place the tools on powerful drives with an elastically supported spindle wherever possible.
  • Observe the recommended rotational speeds.
  • If the smallest area of the burr diameter is being used, the recommended rotational speed can be increased accordingly.
  • To ensure cost­effective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6 mm with drives with a power output from 300 watts.
Materials that can be worked
Aluminium
Brass
Bronze
Copper
Fibre-reinforced thermosetting plastics (GRP, CRP)
Hard aluminium alloys
Hard non-ferrous metal
Plastics
Soft aluminium alloys
Soft non-ferrous metal
Thermoplastics
Tough aluminium alloys
Zinc
Applications
Cutting out holes
Deburring
Leveling
Milling
Milling out
Surface work
Work on weld seams
Drive types
Drive spindle
Flexible shaft drive
Robot
Stationary machines
Straight grinder
Tool machine
PFERDVALUE
product.aggregation.prv-eff
product.aggregation.prv-eff

Downloads

PFERD Newsletter subscription

Register here free of charge for our PFERD newsletter and receive all the latest news on products, services and promotions from the world of PFERD on a regular basis.