Tungsten carbide high-performance burr ball KUD dia. 06x05 mm shank dia. 3 mm TITANIUM for titanium

Technical information

Tungsten carbide high-performance burr ball KUD dia. 06x05 mm shank dia. 3 mm TITANIUM for titanium

Cut: TITANIUM
Dia. external: 6 mm
Dia. shank: 3 mm
Length, cut: 5 mm
Length, total: 1,378
Length, total: 35 mm
RPM from, hard non-ferrous metals: 13000 RPM
RPM to, hard non-ferrous metals: 24000 RPM
Packaging unit: 1 piece

Description

The TITANIUM cut has been especially developed for work on hard titanium materials (tensile strength > 500 N/mm²). It is characterized by an extremely high stock removal rate on this material group, which has very challenging stock removal properties. Tungsten carbide burrs with the TITANIUM cut impress with their smooth milling with considerably reduced vibration and less noise.

Ball-shaped burr according to DIN 8032.

Advantages

Excellent stock removal rate and tool life due to innovative tooth geometry.
Tangibly more aggressive, large chips and very good chip removal.
Comfortable working with reduced vibration and less noise.
The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

Determine the rotational speed in each case depending on the titanium alloy you need to machine.
Reduce the rotational speed if excessive flying sparks occur. Depending on the titanium alloy you are machining, flying sparks may not be entirely avoidable.
To prevent vibrations, place the tools on powerful drives with an elastically supported spindle wherever possible.
Observe the recommended rotational speeds.
To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 3 mm with drives with a power output of 75 to 300 watts.

Safety notes

The very high stock removal rate can cause discolouration on the shank. This does not constitute a safety risk.

Materials that can be worked: Hard non-ferrous metal; Titanium; Titanium alloys

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work; Work on weld seams

Drive types: Drive spindle; Flexible shaft drive; Robot; Stationary machines; Straight grinder; Tool machine

PFERDVALUE

PFERDEFFICIENCY

recommends burrs with the TITANIUM cut for working for long periods with low levels of fatigue, whilst saving resources and achieving perfect results as quickly as possible.